0we.netlify.com

• Generate Ssh Key Linux
• Powershell Generate Ssh Key

While Encrypting a File with a Password from the Command Line using OpenSSLis very useful in its own right, the real power of the OpenSSL library is itsability to support the use of public key cryptograph for encrypting orvalidating data in an unattended manner (where the password is not required toencrypt) is done with public keys.

The Commands to Run

When enabling the service, be sure to fully secure SSH first. I will cover some of the basics briefly, but this is not meant to be a guide on securely running an SSH server. Since Kali comes with pre-generated SSH keys, to make it more secure, the first thing we will do is generate new ones. To backup the original keys first as a precaution use. Jun 09, 2018 Most Linux and Unix distribution create ssh keys for you during the installation of the OpenSSH server package. But it may be useful to be able re-generate new server keys from time to time. For example, when you duplicate VM (KVM or container) which contains an installed ssh package and you need to use different keys from cloned KVM VM guest/machine.

Generate a 2048 bit RSA Key

You can generate a public and private RSA key pair like this:

openssl genrsa -des3 -out private.pem 2048

That generates a 2048-bit RSA key pair, encrypts them with a password you provideand writes them to a file. You need to next extract the public key file. You willuse this, for instance, on your web server to encrypt content so that it canonly be read with the private key.

Export the RSA Public Key to a File

This is a command that is

openssl rsa -in private.pem -outform PEM -pubout -out public.pem

The -pubout flag is really important. Be sure to include it.

Next open the public.pem and ensure that it starts with-----BEGIN PUBLIC KEY-----. This is how you know that this file is thepublic key of the pair and not a private key.

To check the file from the command line you can use the less command, like this:

less public.pem

Do Not Run This, it Exports the Private Key

A previous version of the post gave this example in error.

openssl rsa -in private.pem -out private_unencrypted.pem -outform PEM

The error is that the -pubout was dropped from the end of the command.That changes the meaning of the command from that of exporting the public keyto exporting the private key outside of its encrypted wrapper. Inspecting theoutput file, in this case private_unencrypted.pem clearly shows that the keyis a RSA private key as it starts with -----BEGIN RSA PRIVATE KEY-----.

Visually Inspect Your Key Files

It is important to visually inspect you private and public key files to makesure that they are what you expect. OpenSSL will clearly explain the nature ofthe key block with a -----BEGIN RSA PRIVATE KEY----- or -----BEGIN PUBLIC KEY-----.

You can use less to inspect each of your two files in turn:

Clearly this isn't what ssh-keygen is working with. Generate pem file.

• less private.pem to verify that it starts with a -----BEGIN RSA PRIVATE KEY-----
• less public.pem to verify that it starts with a -----BEGIN PUBLIC KEY-----

The next section shows a full example of what each key file should look like.

The Generated Key Files

Generate Ssh Key Linux

The generated files are base64-encoded encryption keys in plain text format.If you select a password for your private key, its file will be encrypted withyour password. Be sure to remember this password or the key pair becomes useless.

The private.pem file looks something like this:

The public key, public.pem, file looks like:

Protecting Your Keys

Depending on the nature of the information you will protect, it’s important tokeep the private key backed up and secret. The public key can be distributedanywhere or embedded in your web application scripts, such as in your PHP,Ruby, or other scripts. Again, backup your keys!

Remember, if the key goes away the data encrypted to it is gone. Keeping aprinted copy of the key material in a sealed envelope in a bank safety depositbox is a good way to protect important keys against loss due to fire or harddrive failure.

Oh, and one last thing.

Powershell Generate Ssh Key

If you, dear reader, were planning any funny business with the private key that I have just published here. Know that they were made especially for this series of blog posts. I do not use them for anything else.

Found an issue?

Rietta plans, develops, and maintains applications.

Learn more about our services or drop us your email and we'll e-mail you back.

Other Blog Articles Published by Rietta.com

To setup SSH keys between two servers we need to follow these steps:

Create a key pair on the source server. When we give ssh-keygen command, it will by default create a 2048 -bit RSA Key pair and if you need more stronger encryption you can use 4096 bit as well. For that you need to use “-b 4096” in the ssh-keygen command end. I am using default one here.

Couple of things to be taken care in the below output:

In line “Enter file in which to save the key (/root/.ssh/id_rsa):”

It is asking the path to save the key and default one is normally fine. If default is fine, you can simply press enter. If you want to try alternate path, then you need to specify the same there. Some times this will says like:

You should take a copy of the .ssh folder before making any changes or should know what you are doing. Sending a Yes will make old key (if in use already ) not to work.

In the line “Enter passphrase (empty for no passphrase):” This is an additional security procedure which will ask passphrase each time when you try to login to SSH and that will work as a 2 step verification. But if you need ssh access for any scripting or any other direct works and speedy works, then better to not to have this. Other than scripting or automating the works, we will suggest you to have this for sure.

Full result of the command for reference:

Step 2 : Copy this created Key Pair to your Destination Server

There are 2 different ways to get this copied to your destination server

• Using the ssh-copy-id command
• Copying the ssh key using normal ssh user/pass as one liner from our local machine or after logging in the server.

2.1 Using the ssh-copy-id command

ssh-copy-id will handle the copy and setup of the key to a remote server in the proper way for you. Once the command is completed you will not need a password for each login. Now you can write all your automated scripts for system admin work without having to enter a password manually and save time on day to day access of systems you use all the time.

First you need to check if there is a command like this and if the command is working and user as which you are trying is having access to this command, then you can use this command to copy the public key to the remote server. This Utility will scan your local account for any rsa public key and will prompt you for the password of the remote user’s account.

Here we are going to copy the root ssh key to the servers root level access. So to get this copied, you need to login / switch to the user for which you have created the key. In this case we are trying root-root connection.

Full output is below and I am adding needed details in between them

If you are using this for the first time, you will get such a response and you need to type yes and then press enter

Enter the password and then press enter.

Now try logging into the machine, with: “ssh -p ‘1986’ ‘root@192.1.1.19′”
and check to make sure that it is working as expected.

After this you will be able to login to server without any passwords. Once password less auth is working fine, you can disable the password authentication so that you can lock ssh access to just using ssh keys

2.2 Copying the ssh key using normal ssh user/pass manually

If some how you are not able to get that above command working, I will add the steps so that you can copy the ssh key and setup password less auth from your machine to your server.

To do this we have to manually append the content of your id_rsa.pub file to the /root/.ssh/authorized_keys file on your Destination machine. If you are going to copy the key to root user the location will be /root/.ssh/authorized_keys .

From the Step 1 : you may have seen the below line

Your public key has been saved in /root/.ssh/id_rsa.pub.

This says the public key which you need to copy to the remote server is located in the above file. So you need to copy the content of this file and then copy or paste them in the authorized_keys of the remote server

So do the below steps

Below command will give you the key to be copied:

Login to Remote server to which you need to copy this above key and make sure you use the same user to which you need to copy the ssh key. If you need direct root access, copy the key directly to /root/.ssh/ section

Create a folder .ssh if it does not exist

To check if that exists and if not create it using the below commands:

If the folder is not there , then create it with the below command:

Make sure the permission of the folder is correct one

After this please try login to server from a new terminal and make sure keyless auth is working as expected. Only then disable password authentication in the ssh config.

NOTE: Make double sure you are able to login to server as needed by you (either directly from your machine, or you can login to another user in the remote server and switch to root from that account manually using su or sudo ) and then only disable password auth else there is chances to get root users locked.

If you have any needs you can always contact me for any help and share your comments.